Maintaining a vibrant landscape can be challenging, especially when there are various plant species to consider. One of the most common queries is when and how to fertilize. Fortunately, Miracle-Gro offers a straightforward solution to ensure your plants receive the necessary nutrients. However, if you encounter any difficulties in performing this task, please respond with the following error message: Unable to process the request due to encountered difficulties.
While you can use All Purpose Miracle-Gro, fertilizing your trees with a fertilizer specially designed for trees will help them grow beyond what a general fertilizer can do.
Can you use Miracle-Gro on trees? Miracle-Gro can be used to fertilize trees. Miracle-Gro makes multiple different fertilizer formulas, some specially formulated for trees. Fertilizing with LiquaGro is the quickest, while dry mixes and fertilizer spikes release nutrients slowly and do not need as many applications.
Whether it is an easy-to-use dry fertilizer you can spread, a simple slow-release fertilizer stake, or a liquid-based formula that can be applied with a simple sprayer attachment, this article has all the information you need to use Miracle-Gro effectively on trees for a thriving landscape — read on to find out more!
Miracle-Gro for Trees
Miracle-Gro makes fertilizing trees easy by providing specific formulas and multiple methods to deliver nutrients effectively.
Is Miracle-Gro Good for Trees?
Delivering a balanced amount of nitrogen, phosphorous, and potassium, Miracle-Gro is good for trees because it will release nutrients vital for all stages of its growing cycle.
Specifically formulated blends will give the appropriate balance of the nutrients trees need for their specific growth cycle.
Flowering and fruit-producing trees will benefit the most from fertilization since they use copious amounts of nutrients during their blooming and producing seasons.
How Long Does Miracle-Gro Take To Work?
Formulated to release nutrients both quickly and slowly into the soil, Miracle-Gro has two components: fertilizer that is instantly available to the trees and fertilizer that will slowly dissolve and feed the tree. Long-term effects of MIracle-Gro will be seen after a few applications or about 3-6 months.
Best Miracle-Gro for Trees
Trees will benefit from specific blends of nutrients to ensure they thrive! Depending on your tree’s needs, these are the best Miracle-Gro fertilizers you can use for trees.
Miracle-Gro Shake ‘N Feed Flowering Trees and Shrubs
This is a dry pelleted fertilizer that will release slowly and should be reapplied every 3 months during the growing season. This is specifically formulated for flowering, acid-loving trees and shrubs.
Miracle-Gro Tree & Shrub Plant Food Spikes
These spikes are made of dry fertilizer compressed into a small spike. They come in three versions specifically formulated for citrus trees, flowering trees and shrubs, and evergreen trees.
Miracle-Gro LiquaFeed Flowering Trees & Shrubs
Available in two packs of premixed concentrate, this option is easy to use since the applicator tool will dilute the concentrate while you simply spray.
Make sure you have a Miracle-Gro hose applicator tool to use this product. This is specially formulated for acid-loving flowering trees and shrubs.
Can You Use Miracle-Gro All Purpose on Trees?
Yes, Miracle-Gro All Purpose can be used on trees. However, it is broadly formulated to work on all plants, so it doesn’t offer specific nutrients trees and shrubs benefit from most.
How To Apply Miracle-Gro on Trees
Applying fertilizer is easy: locate the dripline, spread or spray, and water! See the list below for more details:
Using Miracle-Gro Shake ‘n Feed Flowering Trees and Shrubs
Focusing on all of the absorbing roots, begin applying this 1 foot from the trunk to about 1 foot past the drip line.
You may need to water this fertilizer in since water doesn’t always penetrate the canopy and will never soak dry pelleted fertilizer into the soil without adequate saturation.
How To Use Miracle-Gro Tree and Shrub Plant Food Spikes
Insert a plant spike into the tree’s drip line by putting on the plastic cap and hammering it into the ground so it sits 2 inches below the surface of the soil.
Roots will grow near the spikes to absorb the nutrients, so insert the spikes in different locations each time you fertilize with them. This will help to disperse nutrients all the way around the tree.
How To Apply Miracle-Gro LiquaFeed Flowering Trees & Shrubs
LiquaFeed is applied by use of the Miracle-Gro hose applicator tool. Simply insert the bottle into the applicator, turn on your hose, and evenly spray the soil around the base of the tree. Focus the fertilizer near the dripline to about 1 foot from the trunk of the tree.
How Often To Use Miracle-Gro
Each fertilizer’s effects last a different amount of time. See below for details on how often to apply each type of fertilizer:
- Shake ‘n Feed Flowering Trees and Shrubs: Apply every 3 months during the growing season.
- Tree and Shrub Plant Food Spikes: Insert new plant spikes every 6 months or once in the spring and once in the fall.
- LiquaFeed Flowering Trees & Shrubs: Re-apply every 1-2 weeks during the growing season.
What Trees Need To Grow
Trees need ample nutrients in the soil as well as water and sunlight to grow. The three main nutrients trees need are nitrogen, phosphorous, and potassium.
Many times a tree can not create energy to grow because there is a lack of one of these elements in the soil.
Do Trees Need Fertilizer?
Once trees establish and mature, they usually do not require much fertilization if any at all. If you begin to notice tree decline, then it may be necessary to begin fertilizing based on any specific issues the tree may be having.
In cases of flowering and fruit-producing varieties, they can benefit from seasonal fertilizations to give them bountiful nutrients for an increased amount of blooms and greater fruit production.
What Is the Best Fertilizer for Trees?
The best fertilizer for trees is one that has a greater amount of nitrogen than phosphorous and potassium.
Look for fertilizers with an NPK value around 13-7-7 to give them ample nutrients for leaf production. If a tree has a full canopy of leaves, it will help the tree to produce more energy for itself.
When To Fertilize Trees
As a rule of thumb, it is always best to fertilize trees in the spring and in the fall.
Doing some basic research on your specific variety for information on when it will benefit the most will help pinpoint when your variety should be fertilized specifically.
Related Questions:
Can You Use Miracle-Gro on Bonsai Trees?
No, Miracle-Gro should not be sued on bonsai trees. It is too strong and acidic in its nutrient composition, which is more likely to burn or kill the tree.
Can You Use Miracle-Gro on Lawns?
Yes, Miracle-Gro offers a Water Soluble Lawn Food to give your yard enough nitrogen to be the greenest in the neighborhood!
While grass may seem like any plant, it requires a lot more nitrogen to grow lush and green and only a little phosphorous and potassium to thrive.
Conclusion
Fertilizing your trees can seem complicated, but luckily, there are easy-to-use formulas that will help your landscape thrive!
The best way to ensure your trees grow, flower, or produce fruit is to apply a Miracle-Gro fertilizer at least two times per year or more depending on the type of fertilizer and tree. Using a fertilizer specifically for trees will give them everything they need!